how much is shipping back to cali… hahahahaha
Unless you what the deck with it…
Hahaha
ok… I’ll bite
I’ll take the whole shootin’ match for a buck fiddy
Here is a better pic
Currently got 2.1 x 5.5 charge port and xt90s as the connector (@skyart says that is good) I can change any of those if anyone wants
It is crimped for a daly bms and I can send connector with or you can change for your own bms
It’s £125 if anyone wants
Tree fiddy?
Also I can include a 12s 2amp charger for £20
Also selling a bunch of other stuff wheels carvons and small stuff which I could send it with
Thanks guys
I’ll bite… $125 shipped with deck
You want the deck it will cost a whole lot more
For a free deck??
would the maker-x dual fit that space if you flip the orientation?
might be easier with the daly closer to where the balance leads exit the pack, but that might require re-crimping the balance leads to be shorter
No for shipping to US
Add an extra £100
@sesat it’s sort of possible but saves minimal space
As it could only fit done the middle
If no-one is interested don’t ship battery I will probably just shorten wires and redo it myself to get it to fit
If someone does buy then I will make a 10s2p p42s
Whats with the thousand cables sticking out?..
Bms wires
They prob should be trimmed before use
if you cut it down to 11S2P… could fit
Yeah then needs new bms and lots of re-wiring…
I’m not familiar with the Daly, but I’ve used the d140 and others on lower S count than they were made for, 11s on 12s bms
just need to remove either the first or last Pgroup and reattach corresponding power lead
does anyone know if this combo is compatible with the 4gd?