Ooof that’s a big boi….
52 dim sims
Friends board, 10s18p weighs about 80lb, much chonkier pack coming soon
Current parts list:
Esc: Trampa HD Singles x2 (swapping to Ubox v2 soon)
Remote: Trampa Wand (unlike mines his still works XD)
Battery Pack: 10s18p Samsung 40T:battery: built by me
(Bigger pack Config coming soon😜)
Deck+Enclosures: Flux motion V1 combo with Apache 4800 Pelican Case
Wheels: 8" Primo alphas on trampa CF superstars
(Swapping to 8" Qinds or Golfa tires on Phatlads soon)
Drivetrain: Moon Gear Drive 4.4 ratio with Flipsky 63100 190kv (Swapping to BN M1-AT 3.95 soon)
Trucks: Trampa Vertigos full Green dampas
Bindings: Trampa bindings
Misc: 3s4p P42A accessory battery pack,
Triple light bar headlights and led strip tail lights with more lights coming soon,
Buck converter with switch to power on lights as well as being used to charge the accessory pack when lights arent in use from the Main battery pack.
14kg/30lbs
No thread yet, 12s4p p42a, evo 36’. all TB drivetrain and wheels contributes most of weight
…
How can it be full flavoured at only 3.5%?
23.5kg
What the hell did you use to dewedge that rear truck? Send me to derail jail plz.
Australian perception of ‘full-flavoured’ is vastly different to that of other cultures. We’re a simple bunch.
12S4P 50G, landyachtz switchblade 40", eboosted enclosure, loaded hubs
Weight: 11.1 kg (24.4 lbs)
10S3P P42A, dual 6355s, 218mm hangars
Weight: 9.6 kg (21.2 lbs)
MBS DWII complete, BN M1-AT, 6374s, swappable packs
Weight with 12S6P P42A: 19.4 kg (42.7 lbs)
Weight with 12S2P Samsung 20S: 14.6 kg (32.3 lbs)
24kg
Custom part. Block of aluminum machined to lengthen wheelbase while lowering rear truck angle
Find Out Customs make it?
I made it
I had no idea the onewheels were that heavy. I assumed they were 1/2 - 2/3s the weight of a urethane esk8, based on size and range.
That switchblade is so damn clean. But, why no drop through?
*edit - replied to wrong person