Looking to install a dedicated light system on a flux build atleast front lights tail also if possible I’m running catseye rechargable 800 on my other board.
Any recommendations something similar to LaCroix was what I want anyone know of any?
1 Like
If you are a diy’er you can use our pcb if you like.
Check https://www.rescuestore.net to check it out
4 Likes
Thanks
1 Like
This looks cool but it’s sold out
1 Like
There will be some units available next week on thuesday. Was going to make a thread about it 
4 Likes
Looking forward to it
3 Likes
Have you seen these?
Never used them, but they look pretty cool.
3 Likes
I have used TTL and it works great @Ricco has some of the best customer service and the lights are real easy to set up. I love how my led chenges color based on the direction my board is traveling. It keeps you safe, makes riding at night easier and really does turn some heads
5 Likes
What all do I need to get to add to my board
@Plaidj, if you are interested in the TTL system, I would gladly help you figure out the parts you would need to get it added to your build. Feel free to PM me with any questions you may have 
1 Like
I’ll throw my 2 cents in the hat. I really like these off road LED pod lights:
https://www.tractorsupply.com/tsc/product/traveller-20-watt-led-work-lights-2-pack-tw0810-05146
1,400 lumens, and takes 9 - 36 volts. I’m just using a Riden adjustable buck converter- DPH5005 (correction - DPS5005), to power them from the battery. They are super bright, in a totally sealed metal casing that’s finned on the back to sink heat, and come with mounting hardware.
6 Likes
Those little things great - Im gonna pick them up. What buck converter did you use?
1 Like
DPS5005 is what I used. Kind of pricey, but you can find cheaper ones, though I can’t speak for their quality. I’d go with Riden. I wanted something that was adjustable in case I want to power anything.
More (buck) options:
https://forum.esk8.news/t/power-converters-wiki-i-e-buck-converter-linear-regulator-ubec-sbec-etc
2 Likes
That’s an amazing list.
1 Like
holy cow! Just another minor PhD in E Sk8 I need to spend 40 hours reading about!
Totally awesome list! Thanks for compiling it!
3 Likes
Whoops, I listed the wrong one, the model I used is this one: DPS5005
Much smaller than the other one.
2 Likes
How difficult is it to hook up
On one my first build
It’s very easy. There’s just 4 wires in total. Positive and negative from the battery go into the IN- IN+, and the headlights go to the outputs. The headlights just get wired together. Here is a picture of the power source/buck converter that reduces the battery voltage to the desired headlight voltage.
