The Definitive Guide to Metr App / Metr Pro

[Pavlo_H]

I will also quote the problem here as it seems to be an issue with both systems.

@Pavlo_H

I recently updated my Flexi to 0.19 and found that it doesn’t work with the Metr and potentially has a bug.
I found that every time I restart the firmware through the console, the flexi doesn’t boot up properly and requires a hard restart.
In the metr app, communication works. I am able to read setting, but receiving cell voltage and data about the battery doesn’t work. I enabled the CAN status and can messages were being transferred but still nothing on the Metr.

I then downgraded the Flexi to 0.18 and everything worked just fine.

Flexi Config

Running Metr Can with SD and GPS on 5.48.
If a log file is required I can PM