This is what I got for that
3 Likes
Man that might be good for some, and that’s fine, but my cruising speed is like 25-30 mph 
5 Likes
Yeah I’m okay with lower top speeds but that’s crazy low
3 Likes
It’s almost like someone took an old and ugly toyota corolla lifted it and installed big offroad wheels on it
2 Likes
Did anyone mention 2 inches of risers on a drop through deck? Now thats some fine irony
Please put googly eyes on the drill packs
10 Likes
If anyone wants to print a set I totally will. I have items to trade.
1 Like
We share an aesthetic prowess.
2 Likes
Hot damn, I just realized your top ply is an old Nitro snowboard! The motor cut out screams no fucks to give 
1 Like
And the bottom ply is a montgomery ward chair leg. 
2 Likes
not gonna lie, I’ve a stared at my kids old snowboards (90-110cm) and thought they look early similar to a mtb.
4 Likes
with enough fiberglass… like if you added a thicc enclosure underneath and a couple more ply.
metal plates on top either side for heat sinking and anti-snapping
2 Likes
I too have had this thought, but they have too much flex.
3 Likes
My first mountain board build was with an old snowboard too. I cut like 16" out of the center, put it back together with the cut piece on the bottom and bolted through the binding holes. It was fun.
2 Likes
No flex my way. . Just enough
1 Like
Can confirm, I took one down the hill once and had to will it not to snap. Like Quinn said though, some layer-ups maybe a stringer or 2 and it could be solid.
2 Likes
