Was running my board like this for a while before i bothered to get a box for the batteries 
12 Likes
One of the solder joints that was part of my first build. I promptly repaired it and all the other joints the first time I gave the board a once-over maintenance check, which so happened to be after my crash 3 months ago. So I basically rode around like this for a year.
11 Likes
Yes, battery was taped up and sits in a glass fibre protection casing which also includes the BMS, switch and a battery meter.
1 Like
They only had 1 tire in the back of the trailer so it was probably ok. Curvature of the tire leans with board.
1 Like
How are you running the Tan Tien now?
This is what it looks like at the moment.
I added a second 6374 and made some kydex enclosures. The power is a bit overkill for a first board but it’s pretty fun to ride, the flex of the deck is spot on for me but the wheelbase feels a bit short so might swap it for something else in the future.
7 Likes
Nice! The flex is no issue? Is it a flex 2?
Yep, flex 2 and around 80kg rider. I tried the boosted stealth (vanguard flex 3) this summer but the Tan Tien is a bit stiffer.
I can bottom out the enclosure if I jump on the board but normal carving/cruising is just fine.
1 Like
Like I would ever use 30q🤣
15 Likes
oh shit. How about those bolt on pulleys you’re running?
4 Likes
Or a soldering iron!
13 Likes
8 Likes
7 Likes
That’s the momentum pack isn’t it 
4 Likes
I should post more pictures of my exo.
5 Likes
Bless this thread
2 Likes
Yup. Stole those pics from FB post lol
I insist. He shoulda just given Ralph his money back n stay quiet. He messed up
2 Likes