On another note. My ps4 decided to listen and voice search YouTube during a phone call or mine a minute ago. Great work…
You were talking to your dog
We go over all business transactions…
As you should with any good mom.
For a split second at the beginning I thought she was riding a scooter.
and her pink handcuffs… kinky…
No sir. It does not.
Is it a particularly annoying issue you have?
To follow-up with some actual data:
35D
50D
Green pivot cup (from precision trucks):
Snug fit on the hanger pivot:
The pivot cup can come out of the baseplate, but it’s worth noting that it has a hole at the base of the pivot cup that prevents suction/vacuum unlike the TB218 or SRz trucks.
For reference the TB218 are nearly identical:
@Kellag @3DServisas in the effort to give some constructive feedback, what is the diameter of the pivot cup hole in your baseplates?
Personally both sets of my trucks are perfectly fine, definitely nowhere near the vicinity of “unsafe”. I wouldn’t even call them a bit loose once everything is secured and the kingpin is tightened. As I said, I’m already 400+ miles deep on my first set, neither of my 2 sets exhibit anything that has caused me concern. Curious if it’s a tolerance issue on your baseplates, so a measurement of that diameter would be helpful
I have that same caliper… I had to dubba-take and check my drawer to make sure you didn’t swipe mine!! jajajaja
puna rich > punatic
Ohhhhhhhhh fuckin shit yeah! That looks sick bro!!! Love the surf adaptor! What hubs you got on it?
I repurposed my old Wowgo 2s.
It was really fun to dork around on.
Dickyho 6374, had to tear them apart to change the phase wires as they were only 14AWG. In this process I ruined most of the bearings and those needed to be replaced. The replacements don’t have a tight seal around the shaft so there is some sideways can movement. A couple of the windings were torn apart because the wires were epoxied to the can and during disassembly I ripped them off. Will be buying new motors to replace these as they are now basically useless. You live and learn
Your $2.50 calipers?
But for real, I’m measuring 18.13-18.15 on my red 50Ds, and they fit up just fine. I’d suggest wrapping the pivot cup in teflon pipe tape 2x and it should help the fit. Unless your calipers are garbage and it’s larger than reported