This is what i did, i just got he wera tool set for 60 Euro and everything i possible need is in there. super compact and less than 400g. amazing quality as well.
Evolve upgrades are only people from Melbourne! And i havenāt advertised anywhere, just word of mouthā¦ the diy community isnāt very strong here so lots of production boards and lots of peeps who need them fixed
Ok so I was told to try epoxy to hold the can to the stator. I used loctite 680 . That can shouldnāt unscrew ever again once it cures for 24 hours. Iām never getting it off again as Iād need to blow torch the motor to remove it soā¦
I use it to hold my motor pulleys on with no set screw only a key. I figured fuck it, same shit and it actually works. Now I donāt like the idea of only relying on the loctite to prevent the can unscrewing and locking like it did yesterday but we shall see.
Now a question, I found it a little odd that all of the magnets were fine but one has a nifty gap unlike the others. Also when the can unscrewed itself it ended up causing the stator to hit the can causing those scratches. Nothing seems broken soā¦ should I be Gucci or nah? Havenāt turned the board on since that happened yesterday.