@DEEIF That’s the plan. You’ll need an adapter though which we still need to test.
are adapters available?
Yes. Etoxx sell adapter for aps and leopard motors and one which fit both
really hoped for a yes but was expecting to have to make something - refreshing
It’s pretty easy to make if you have access to cnc.
You can also design motor mounts with mounting holes for 63xx and 80xx motors, but than you fixed on one brand of 80xx motors.
I was looking for something that would let me add 80s to Bajaboard’s existing mounts - this is really good news, a big box of cells and motors (still undecided which ones but thinking APS at the moment) and I can start building I’m hoping I can get it done for Paris
If you have the money go with maytechs sealed 8085.
One thing I didn’t know about the aps 8085, they don’t have temp sensors. Just as additional information as it’s nowhere mentioned.
its going on Bajaboard its been performance + fun > cost from day one, thanks for the advice I’ll do some digging
I hope I can get my aps motors running Spin.
Will hold you up to date of something goes wrong
It’s a Daewon Song Almost Natas Panther.
Lovely Russian carpet
And how much for a set of tires?
That’s an Almost Daewon Song Tom Jerry Natas Spoof in old school shape
@BigBen How long is that enclosure and what’s it called?
Will it fit between the trucks on a 14.5" (368mm) wheelbase?
It’s the mould for the Tayto/Spud. The tail could be cut down a little. I’ll get a tape out in the morning when I can swim to the workshop. Rain is back with a vengeance.
Ah its not been that bad in Reading, just enough to stop me going out on the board unfortunatley
you bastard! lol