He just deleted all Posts and followers.
Such like I said. I really like that some other guys start to build battery’s. I even give recommendations etc. But just be kind to everybody in this small community. And lying is not correct in this place.
He has changed his bio where I am thankful for but he is not showing any respect.
@xsynatic I can still see each post off him
Try it with the insta app?
@xsynatic maybe get rid of all the connectors and solder all the wires directly to make it smaller? But it looks like that may not be enough…
It could work but i don’t really want/like to change hardware itself. (like vesc or Motor phase wires)
I mean i could get a bigger box but it bugs me that i took the time to dremel holes, spray paint it black, mount it and loctite it all down, just to remove it again and use another box.
Welcome to DIY – where each vehicle is serial number 1 and custom-engineered. You have what they’d call “a prototype”
10 minutes later has to get to the USB ports
Jokes on you, i have a Metr Pro module!
But i still need to open it again so i can put some heatshrink on the phase wires and Glue the holes shut.
Lol we’ll see. Something will come up. Something always comes up.
Nitrous oxide switch
Well…Usb here i come. The Motor spins in the wrong direction but swapping phase wires doesn’t help.
Phase wires should not be swapped after motor detection. Quote by Vedder.
Slap the Bass!
sk8tan-2
@xsynatic-0
Is he the doctor of the VESC actually?
So it’s officially Dr. Vedder now?
Seems like it.