Yes, I was lucky on that ^^
It’s an old MBS deck … don’t remeber the model sorry.
He deserved a last life !
I’m still modifiing it until Berg and the Haggy 60T pulley fit.
9 Likes
Man who doesn’t love your carpet
6 Likes
We are Mario/Nintendo nuts in our household. When I get home I’m gonna send you the most epic picture of all the awesome Mario junk stuff I can’t help but buy my son.
1 Like
2 Likes
@ninTHIENdo
This is the one photo I could take without setting everything up like a crazy person haha
The plush collection is worse
7 Likes
Love love love
2 Likes
This is really awesome. Just looking at this, I wonder could you put the stiffeners on the outside? I can see debris getting caught inside there on the straight pieces. If it was smooth on the wheel side and the beams were on the outside I think it’d be better. Any debris entering in there would be more likely to just exit out the back instead of getting caught-up inside
4 Likes
Did you get a 2nd one skinned?
1 Like
This is his tester deck from what I understand.
He wanted it stiffened, so 2 layers of 6oz CF on bottom.
He traded me an awesome used Landyatchz wolfshark and a Landyatchz switch (?)
I couldn’t resist adding the leftover of his over fabric from his hummie deck on top. Wanted it different than the other one, so we decided on mostly green and a little purple glass frit.
My plan is to paint the “hide edge” lime green as well. Or just black. @b264 thoughts?
4 Likes
Yes; I traded a LY Wolfshark and a LY Switch 40 for some skinning work
2 Likes
Lime green is good with me 
1 Like
I’d love to experiment with epoxying cloth to the deck. I’d assume you need a cloth with a high resolution print cause the stuff I’ve seen at Walmart wouldn’t look good on a board. Where do you buy the clothes?
2 Likes
Im preatty sure he uses satin from Spoonflower.
Correct me if im wrong tho.
2 Likes
Dude I want to buy an ender 3 so bad they seem like the best bang for the buck when it comes to 3d printing.
Any tips you want to share? I want to print my pulleys like @longhairedboy
2 Likes
I have all the tips! You can find one for around $180 shipped on ebay. Don’t go for the pro version though. The glass plate upgrade from amazon is $16-21 and does the job. I have a pre-written file of suggested settings that I have tweaked and send it to anyone who I find out buys the ender 3 haha
4 Likes
It’s at $175 right now on gear best, but dude for under 200 it’s so worth it.
Is the glass bed worth it? And yes I’d love those files.
1 Like
Glass and PEI for the win.
3 Likes
I love this little chunky monkey.
4 Likes
It’s been upgraded to 110mm… on a 30.43" deck… and it’s super fun
6 Likes