Both nice, but that orange yellow might have to come home with me at some point. Really like your customs approach with the remotes and now the wheels.
1 Like
Why dye did you use?
congratulation on technology taken almost to the extremeā¦
Ifān you make an intercooler ice-box like drag racersā¦ I will approve of this for scienceā¦
4 Likes
the phillips-head wood screws trouble me mostā¦ are my priorities skewed?
5 Likes
Is that Wagoneer yours, sir?
2 Likes
I hope you did get the cells, maybe it is just me, but I see boxes closed then opened but no cellsā¦
1 Like
Itās my fatherās. I keep it running , he drives it.
3 Likes
What are the holes in the in between the 2 faces for?
3 Likes
Thereās 3 bits of ply there. 2 bits of 4.5mm ply on the bottom, and the top bit is a piece of 18mm ply with relief cuts through it so it bends easier.
Ok I was thinking of it as a board and not for a enclosure.
1 Like
Lots of work, but I like the process and the way it mimics the deck nicely.
1 Like
Legitimately my favorite thing Iāve seen today.
Using an amd cpu fan for your Vescās on top of a heat sink!! Madlad.
4 Likes
Haha itās honestlyy favorite thing about this build yet.
@surfnacho called my board Jank 
so I thought Iād just embrace it. From a building perspective Jank is more fun anyway
4 Likes
Ah who cares, it gives it personality and is functional/beneficial for the board at the same time. Double whammy
2 Likes
Custom kv winding?
1 Like
that was the intentionā¦ Iām abandoning all hope on these statorsā¦ the winding affixing epoxy is way too vileā¦ It pulls up all the stator core insulation with the windingsā¦ I may revist these motors at a later dateā¦ or chuck the bitches in the landfillā¦
2 Likes