if you must get Allen keys, I would recommend these, they work at a 15° angle, perfect for tight and awkward spaces
https://www.amazon.com/dp/B01F6PWYVG/ref=cm_sw_r_sms_apa_i_HT0REbABC5TF9
if you must get Allen keys, I would recommend these, they work at a 15° angle, perfect for tight and awkward spaces
Round ends might be good for big keys 3mm+ but for little ones like the 2mm, 2.5mm they strip easier
I would agree but these aren’t exactly round, it’s hard to explain, but I’ve used these a lot on specifically 2-3mm lol
The only reason for stainless is the corrosion resistance, correct?
Yes, and svelte looks
The guy on that motorcycle/bike; did you by any chance get the name? I remember seeing it on an indiegogo or kickstart but can’t remember now
Looks like an onyx rcr
That’s it! I didn’t realize they had shipped
Yea there’s 3 guys in my local group that have them, even upgraded the batteries to 65ah or something crazy like that
That thing looks dope af
That’s the wrong Justin, Dr.Mike. It’s this one.
Blue is 3/8inch. The green is 1/4. Go with the 3/8. If you wanna wrap
Each wire individually. The 1/4 is a pain in the ass to get on.
Thanks brotha
You got itt, no problem. Just make sure when you cut the cabling use a hot knife or scissors. (Sure you already know this, but just in case)
Yes or course Don’t want the wires to fray
Or you can cut and burn the ends
That bike was pretty quick
Oh yeah. it is. He can go 60mph no problem. 20s in there I think.
Where was my fucken invite bro.
No security issues at the Spectrum lot?