Yes sir !
I just modeled it from the existing Flame mtb trucks that I bought ^^
But for the custom axle machinist ask me around 250€ for the 4 pieces … 
Flame axles are made from Alloy, I try to make them from steel!
3 Likes
yes, just like Is the picture with the stock axles?
3 Likes
Alloy steel? Surface finish is nice
1 Like
no steel 
if Im right (AL7075 stock one)
I want steel (like 42CD04T)
bottom one
And every chanel type drive could be set on them 
!!!
6 Likes
maybe thats the hanger material?
maybe …
but they say alloy axle on the website…
And Rene is making it full AL7075.
Oeh that looks good! Where will u get the drive manufactured?
1 Like
not eggzakery… what you are feeling is cogging effect on the magnetic flux, showing not only how strong the flux field is, but also how weak it is… some like this “feel” as they “think” this is desirable… but it’s not, and it’s not as efficient as a flux field that is better directed and managed, and does not exhibit this “cogging” feel…
2 Likes
Looks like a sweet design, but what plastic are you using? I would worry it will melt when soldering
5 Likes
solder first. then push terminals thru the back
EDIT:
Or better yet, push wire thru printed housing, solder terminal away from printed part and pull the wire to pull the terminal into the housing… brilliant!!!
8 Likes
Its just normal pla for now, i think im gonna use nylon in the end… and yes, like @kook said, i have to solder first and then push and glue the bullet connectors in
3 Likes
A mockup of the legendary MR90 emerges from the imagination
11 Likes
I was asking not if the shaft was keyed for the pulley — but is the shaft keyed for the rotor (with the magnets on it)? Because rotors slipping on the shaft has been a consistent problem with many different motor designs/brands. Grubscrews are shit.
3 Likes
I was litterally trying to come up with a kinda MR90 since yesterday, dude that’s awesome !!
Did you test it ? Will you share the file ? I like that! 
6 Likes
No, I didnt test it yet. But I think that these 5,5mm Bullets are a bit overkill for my 6384 motors 
When everything is finished, i will upload the design to thingiverse, but you would need the exact same bullet connectors to make it work 
3 Likes
It’s alright I can sacrifice a pair of XT90 for science 
You have eventually a step or solidworks version?
I have 6.9mm bullets waiting to be treated the hard way like they deserve 
1 Like
XT90 “only” have 4.5mm bullets (inner dia.)
Not yet, i have too much stuff to do right now
1 Like
Aaaaargh my life was a lie! I’ll commit to reset my mind by watching @Sender last sale topic. BRB.
2 Likes