Yo could you hook a homie up with a gasket link🙏
Also is it squishy
1 Like
Yea it’ll compress a bit.
I don’t know if it’ll ship to the US though, give it a try.
https://www.lazada.sg/-i4184634-s5254758.html?urlFlag=true&mp=1
4 Likes
Is it closed cell or open cell?
Does it return to its original shape after being smashed for a while?
It’s a closed cell
1 Like
Anyone tried printing gaskets with TPU?
2 Likes
Is that th Etsy deck+gaskets?
Ah yes, The true hierarchy of needs
5 Likes
That looks a a normal mountain board with caster wheels attached. Hell I could make that.
1 Like
Check the camber on the wheels.
You would need to either bend your truck axles or use FleXL trucks to get the same effect 
2 Likes
Maybe the trucks are bent in the picture. I feel like you could get better performance out of those lean trucks
2 Likes
beautiful setup…
3 Likes
Or, this customer could avoid leaving this board next to the ocean to get hit by a wave. All electronics died, battery survived thanks to the enclosure design keeping all the water pooled in the electronic compartment.
Motors and wheels received all new bearings as well.
No
7 Likes
If a board can’t survive an ocean wave, it’s not good enough
1 Like
I have with limited success… you can get a good fit, on a cambered deck, but they lack any substantial squish, and really require some additional sealant…
1 Like
Okay… that’s actually overstepping a bound.
90%+ boards can’t ride on even compacted shoreline sand.
does this link work to show the secret?
apparently it does work
#sorrynotsorryFreebord
So, full ceramic bearings, titanium axle/hardware only, vapor deposition coating on all motors and exposed metals, positive pressure enclosure to eject high pressure water intake, plastic capped/sealed charging outlets
4 Likes
Don’t forget it also needs to float
2 Likes