Yeah that’s the official method
6 Likes
Maybe I’m just especially at it bad, but I feel like I have way more trouble telling if it’s too small than too big so I start larger and work my way down.
2 Likes
I think those are just as wide as the xl40 hellcats it ride a lil rougher but feel good
2 Likes
The black/silver motif here is glorious.
4 Likes
Don’t pretend like you’ve got kids, bro. We understand.
6 Likes
mbs pattern isn’t it?
as long as it fits, then sanding isn’t really a big deal
1 Like
They are absurdly wide, but I like it - about 61mm inner width. How wide are the Kaly Xls?
come to Chicago I2S
That looks a lot like that strange Ace or Apex or whatever it was and their copycat Hypertrucks.
1 Like
Lol ya it’s the Acedeck trucks on their new board
1 Like
Custom handmade by …myself
full composite (no wood)
designed to beat everything
100x26.5cm
Layup designed for extra strong pop , torsionall stiffness only under the feet
better handling on road and “only 2.2kg” weight “only” because this is prototype before final product that should be around 1.8-1.9kg depend of the protection layer thickness , more expensive ones should be around 1.6kg
in the way deck with integrated trucks top + ultra lightweight trucks + lightweight wheels (no budget …coming who knows when …after prices go down XD )
8 Likes
yes its Acedeck…
Considering MBS is retiring the old truck design which probably means the old shockblocks are going along with the retirement… guessing the mold was “borrowed” by other makers
2 Likes
I drilled out the adapter holes with a 4mm drill, no sanding screws required 
Yes i did that too after . I was kinda scared that it might become too wide but it worked out great.
2 Likes
Unless you mix metric with freedom units. Dumb me didn’t realize I had both types of bits
3 Likes
