I bid you good luck sir. Give it hell, I’m sure it’ll be a beaut.
1 Like
I got the X1 Max, I was really amazed with how well built it was. It’s the cleanest looking board out there. I thought I would flex that deck the second I stepped on it. Thing is solid!
1 Like
I am also super surprised at the strength of the deck. Especially after seeing inside it. The base beneath the battery is only like 2-3mm thick, but the deck is still surprisingly stiff.
I’m super tempted to cut it up and see what magic is inside
3 Likes
my x1pro died exactly when ODO hit 1000km, it was not fun, but i should be glad that i was only 600m from home
3 Likes
you should look up max capps on Instagram, he cuts out the middle of boards and makes them foam core.
2 Likes
This is super awesome. Please show us, how have you connected the wheel to the timing belt?
2 Likes
It’s an interesting solution with sort of clamping in the bearing seat of the wheel. This way any skateboard wheel will fit but it can slip under high torque…
15 Likes
You should make a thread on that adapter/pulley and where one could obtain some of them.
4 Likes
Are there bearings inside the wheel?
1 Like
It’s not my design. They are LaGrange L1 Trucks from 2012 xD
It’s an esk8 relict now.
Not on the driven wheel. The bearings are on the axle, that goes through the whole hanger.
Actually, the other wheel could be driven too, if I take the bearings out and replace them with solid metal.
2 Likes
I did not notice the super thicc hanger LOL. I definitely see it now
1 Like
1WD sucks though, I hope there aren’t a lot of left turns on your paths. I’d make the left wheel driven too. 
Otherwise, really cool hardware!
Epoxy. Filling up the voids in the 3d print. Once it’s cured i’ll give it a little sand and a clearcoat.
I may or may not have drilled holes in the wrong spot on an enclosure… badges will fix it 
4 Likes
It’s okay for me. I rode a 1WD as my main board for 3 years 
But I agree, 2wd is better xd
3 Likes
Depends what you’re optimizing for.
If you’re optimizing for weight, then 2WD sucks 
2 Likes
Tanuki sunset?
Fuuuuuuck, if I had this I would use Venom Magnums wheels. Would also be dope for actual slide wheels
2 Likes
Venum Magnum Mach1 already have pulleys available
3 Likes
That’s a fine solution! 
I dig it.