To clarify, it’s the listed price per cell, plus shipping cost from the resender? I’m gonna put my name down for 36 of these if I’m not missing something. Could do 40 if necessary, and assuming no crazy extra costs, although I’m guessing these’ll have to go UPS/Fedex ground right?
Listed price/cell ($2.60) plus shipping and handling (PP fees), ends up being about an additional buck per cell. Then reshipping if you aren’t where they are being shipped to.
Or for less than 100, you pay like 4.5/cell for their lot of 48.
Ok, thanks for clarifying. I put myself down for 36, assuming that doesn’t run more than $4.5 total per cell to me CONUS. Beyond that I’d need some concrete numbers.
I would make concrete numbers before money exchanges hands.
Thanks
Who is using these cells atm?
@Skyart made a 12s5p pack in his big boi trampa build
range monsters,
unfortunately available amps are just a little about 30qs hence the need for an extra p group.
Were looking good. Just need someone to get maybe 2 dozen by someone. Im getting a concrete shipping quote now
Yes can confirm 12s5p, these however are not ideal for esk8, waaaaay too big! Will work better in a top mount box.
Yeah basically their niche is for boards with lots of room and a small budget
Or something stupid like this…
It’s like the cheaper/less powerful/similar range version of a 12S6P 40T and two Unities.
Those two “unitys” how much current are you pushing through each? Thinking of using in a 4wd dd build
Thats what Ill be doing
2 unitys, and a 12s5p of these
The battery should be happiest @ 40A/pack, so 18-22 battery amps/corner @ 10S, 35-40 motor amps. Barely pushing the maker-X duals at all, should still be plenty of power to overwhelm DKP trucks.
I have some of these the current rating is exaggerated. They sag very quickly. I would rate them no more that 10 amps
Can you quantify the sag? the tests seem to indicate they have the equivalent sag of 30qs?
nevermind let me upload seperate
Hmmm that would be a non-starter for me. I already have plenty of cheap high AH cells that sag bad…
I have them connected to my inverter when I push more than 12 AMP per cell the voltage on the front of the inverter dips, this doesn’t happen with a similar 38120 pack. It’s definately not what they claim. Capacity wise it’s close to what they claim. Not very scientific just an observation.
Can you be more specific than “similar”? Sorry just so we have some data point. Minor pack configuration in terms of cell group sizes could make a big difference here. All cells sag when loaded, it’s just a question of how much and how quickly they recover obviously.
My point is they are not a real 30 amp capable cell, 20 maybe but the sag is less than desirable in an esk8. If you use 4p ok doable. 2p no way