Newbee Swing-Arm truck

[JRP3]

I made these “LSD’s”

Exway Atlas 4wd mods

I made a “limited slip differential” for the board so I could have the 2 front motors turning together when taking off in low traction situations. Seems to be working pretty well off road so far, I even get a bit of slip when carving on pavement, I put some strips of tape on the coupler and the motors to see if they ever rotate independently and they do to some degree. It’s a 1.5 inch flexible pipe coupler that was able to stretch around the slightly more than 2 inch diameter of the motors wit…

Exway Atlas 4wd mods

Moved the rear fenders up front and shifted the mounting point so they hang lower, made new longer fenders for the rear. [Fenders2] Also made a different version of a limited slip differential for the rear using two rubber pipe caps with springs underneath them. Works pretty well. [LS Diff2]