my take on a DIY OneWheel

[Fuzzler]

I mean, I get it, don’t go cheap, but I’m on a low budget and expect to wreck at least one anyways…

I count 30 - so 15 poles right? I’m completely confused by now

Redstar | DIY onewheel

In which case there’s good news for you, just cracked the Phub-188 open! I figured the two end caps likely attach to the rotor with those screws in them, and hold the rotor in place with bearings. After removing the screws nothing would budge, but a solution presented itself in the form of a hammer. [P_20200314_235801_vHDR_On] By furiously hammering at the non-wire side of the axle I got the stator and the other endcap to slide out somewhat, I could then grab the endcap and pull the stator o…