ashwc
January 19, 2023, 8:49pm
#1
I finally got tired of maintaining my belt drive on my matrix 2s, and I wanna try gear drives.
looking for something, hopefully around $200, but could spend more if I cant find anything cheap. Let me know if you have any gear drives you would be willing to part with that’ll work with my trucks. thanks!
2 Likes
Someone is currently selling a bn M1AT drive that might work for you if its not claimed
ashwc
January 19, 2023, 8:59pm
#3
I messaged them, although I think someone messaged about them first
1 Like
Newbee 4GS is on sale for $279 I believe. I have a set on my Matrix II’s
1 Like
rusins
January 19, 2023, 10:57pm
#5
Moon drives with steel straight cut gears with clamps for Luna/Apex air. 59:11 ratio, 8mm shaft. 240€
I think these are batch 7, maybe 8? These are missing a single wheel gear because I had to offer @Rudi a replacement. He has one coming in the mail, so when these sell they will have all parts present.
Matrix 2 trucks with orange shockblocks, Batch 1 Moon drives with rusted parts. 9T pinion for 8mm and 12T pinion for 10mm shaft. (4.9:1 and 3.7:1 ratio respectively) – 280€
This was my previous mountainboard setup. The POM wheel gears are the new, thicker, sturdier design. I can’t part this out because getting the clamps on the trucks takes a lot of hammering. If you can ignore the rusted look then this is fantastic value for a mtb drivetrain.
Could get one of these; for the first ones you’d just need to get the adapter clamp for matrix 2 / switch to a precision truck instead
4 Likes
dskate
January 20, 2023, 1:34am
#7
SRB open gear drives are pretty dang affordable. Depending on your use case they could work
Facko
January 20, 2023, 4:16pm
#8
2 Likes