Can’t help you sorry. I had sensor issues on latest build using 5.2 so just disconnected sensors. Eventually want it running sensored or at least HFI start with temp sensor if that actually works on 5.2 (not experimented yet but might be a 5.3 addition).
Idk where that sensor issue in 5.2 is coming from, but a workaround would be to do motor detection with 5.1, write down the sensor values, than update to 5.2 and manually enter the values for the sensors.
It’s not the greatest option, but if nothing else works that could be worth a try.
Phew I’m glad this thread got made. I’d heard of this issue 2 or 3 other times but never got follow through on it.
I too, was running the sensored life. I updated to 5.2 FW and noticed it failed to detect both motors. I figured I pinched a cable as I had installed a new esc (stormcore 60d+) and was messing around in there. Turns out I did break a wire. I patched it with a new one but still couldn’t get either motor to detect.
Unfortunately, when I tested 5.3 beta FW, they still came up unsensored so I may have just broken them both at the same time. Time will tell.
Yeah that’s why I’m not focusing on the stormcores yet, I extended the sensor wires so I may have messed up some soldering. But the flux I definitely didn’t touch, it was working well, and all I did was a fw upgrade
I don’t know whars causing the issue, that’s s the thing. It was working perfectly with the old firmware, a’d started messing up when i upgraded to 5.2. Same issues on my stormcores, so that why I think the firmware is the issue, I definitely could be wrong though.
I’ve had issues with “bad hall results received” as well
For the detections where you got exactly 60.00A Motor current there seems to be not only an issues with the hall sensors.
60.00A is the default value for 750g motors if the motor current couldn’t be calculated during detection.
Hey guys, I’m back. I downgraded to 23.46 with the Unity tool, and redid the setup, and I think everything worked well. But then Davega doesn’t work… Has anyone successfully installed a davega on a flux?