I’ll chime in with what I’ve been doing for my 2X Lipo build.
I don’t think there’s Lipo specific option in that wizard dropdown - I actually didn’t know that about the Lipo cutoff difference vs other LiION cells, sounds like I should adjust that on my build, thankfully haven’t run down the cells all the way on a ride yet.
I believe that LIIRON you selected would actually be for LiFePO batteries and is moving both cutoffs down below what you would want.
I would think that the batteries are set up in series so that would be 12S 14000maH.
I’ve been basing my parameter calculations on the guide in this thread: VESC settings you should know about / (VESC for beginners)
That guide is written for other cells but I just apply it to Lipos as well.
On my Lipos which are rated 15C on the label I’ve gone with 10C discharge to be conservative - if you went with 10C here you’d be at 140 battery amps / 2 VESC = 70 battery current amps
And then for regen I do 1C so that would be 14 amps / 2 = 7 regen amps
I enter that stuff manually on the current page after the wizard though.
I should say I’m also a beginner and haven’t been running my Lipo setup for too long, but so far it’s been working pretty stable.