Flipsky 63100 motor help

[PedroMcJimenez]

Flipsky Battle Hardened Motor shaft removal and swap.

Ok, here is the final, hard won truth. I scienced this motor, because SCIENCE. [Ren And Stimpy Nicksplat GIF by NickRewind] There are two small M4 set screws hidden deep within the blue epoxy filling both holes in the can. The shaft has two unthreaded cavities to align with those set screws. [20220607_182453] [20220607_183223] If you’re going to replace a shaft in the latest gen Flipsky motors, I recommend drilling both holes out with a 7/64" (or 3mm) drill bit. There’s the outer plug, a g…

@sleepless you ever have luck getting the shaft secured?