@Skyart thank you! That was more helpful than an hour of vesc how-to on youtube. Since many have a 12s4p 21700 P42 w a dual 6374 motors and use the PC vesc tool I want to make sure I’m halving the right numbers. These are the values you would enter:
- motor max current: 80 (range: 70 to 90) adjust for low speed torque
- motor curr max break: -65 (range:-60 to -70) adjust for low speed break
- battery current max: 50 (battery max continuous 100A divided by 2)
- battery current max regen: 16 (max charge current 8A * 4p = 32 divided by 2)
- voltage cuttoff start: 40
- voltage cuttof end: 36
- ERPM: leave limit at 100,000 or change?
Save and then repeat for other side