The List
# | item | cond | price |
---|---|---|---|
15 | HTD-15-5 Belts!! | new |
|
17 | set of 2 MBS rockstar hubs | new |
|
25 | Redember Northcamp and @BigBen Enclosure | new |
|
29 | SRB 30mm Standard motor plates | used |
|
30 | Pair of Lacroix 20T Titanium pulleys 10mm | used |
|
31 | Pair of 15T Aluminum Pulleys 10mm | used |
|
35 | … more to come? |
I take venmo, paypal, can work out other stuff if needed.
pls add fees if opting for buyer protection
When you DM please be so kind as to change the subject to the item you’re requesting. ty,
Pics
open/close pictures
#15 HTD-15-5 Belts POWGE
I figure i see people randomly looking for a quick belt and i have a bunch “in stock” might as well list them in case it helps.
length | width | pitch | qty | |
---|---|---|---|---|
365 | 15 | 5 | 2 | |
370 | 15 | 5 | 2 | |
405 | 15 | 5 | 1 | (prototipo) |
435 | 15 | 5 | 1 | |
440 | 15 | 5 | 8 | |
445 | 15 | 5 | 10 |
[/details]
#17 Set of 2 MBS rockstar II hubs new. (sans bolts)
These were never used.
Now with bolts.
#25 Redember Northcamp and @BigBen Enclosure (new)
Kept in the plastic wrap. Haven’t gotten around to building it.
enclosure is about 9 x 9 in 21700 p42as doublestack.
66cm x 19cm x 5cm
The smallest battery you’d do is probably 14s8p and if you’re good at packing and move the ESCs to the outside 18s9p
see pics in the more section.
#29 SRB 30mm Standard motor plates
Not purty but fine with some cleanup and paint. no cross bar included.
for standard axle not HD.
#30 Pair of Lacroix 20T Titanium pulleys
20T
10mm bore
w/ keyway
Note! these do not have holes for grub screws, lacroix held them in place with circlips.
sry they have not been cleaned up.
#31 Pair of 15T Aluminum Pulleys
15T
10mm bore
w/ keyway
Sold
show me the sold stuff
# | item | cond | price |
---|---|---|---|
1 | DieBieMS batch 3, | new |
|
2 | @IDEA v7 motor mounts with idlers for MBS matrix II | new |
|
3 | @IDEA 72T wheel pulleys with MBS hole pattern | new |
|
4 | 12s BMS pulled from mboard battery | used |
|
5 | 12s Lacroix Lonestar BMS (OG) | used |
|
6 | Pair of Boosted Motors for repair. wobbly shafts. | needs service |
|
7 | 2x Lacroix Stormcore 100D | used | $325ea shipped (US) |
8 | EnertionUSA Unity (no blood) | new | $300 shipped (US) |
9 | Nano remote and receiver | used | $0 + shipping (or $5) (US) |
10 | Enertion Nano remote and receiver | used | $0 + shipping (or $5) (US) |
11 | Land Surf HammerHead Remote (enertion nano guts) | used |
|
12 | MBS Matrix II truck, + bonus hangar | used | $35 shipped (US) |
13 | Stooge SRB 3-link trucks w/ new axels and extra motor mounts | used | $295 shipped (US) |
14 | 2.4ghz mini remote and receiver | new |
|
18 | Land Surf Axle Nuts V1 M12 Black x4 | new |
|
19 | Land Surf Deez Nuts V2 M12 Black x4 | used |
|
20 | Land Surf Axle Nuts V1 M12 Red x4 | used |
|
21 | Land Surf Axle Nuts V2 M12 Red x3 | used |
|
22 | YZPower-450 12s 6A charger | new | $44 shipped (US) |
23 | Pair of Flipsky 6374 190kv Battle Hardened motors 8mm shaft | new |
|
24 | Pair of Flipsky 6354 190kv Battle Hardened motors 8mm shaft | new |
|
26 | FreeSK8 OSRR Bruce and receiver | used |
|
27 | Metr Pro Unity | used |
|
28 | Moon Drive mounts for MBS Matrix II | used |
|
32 | Pair of SRB 78T Spur Gears | used | $65 shipped (US) |
33 | Freesk8 Xenigotchi / Robogotchi + GPS | used |
|
34 | set of 4x MBS rockstar hubs + 2x 62T pulleys | used |
|
#1 DieBieBMS
#2 @IDEA v7 MBS motor mounts with idlers
#3 @IDEA 72T wheel pulleys
#4 12s mboard bms
#5 12s BMS, lacroix lonestar
#6 pair of boosted motors, need service, wobbly shaft
#7 Lacroix Stormcore 100d (x2)
Update, these are apparently an early batch stormcore. (first batch?) No 100D marking on the sides. no version info on the pcb. be aware of this. first one was stress tested by the buyer. said it was good.
Note just the stormcore what you see in the pics. I don’t have the power buttons to go with em.
I got these from a PEV company that was trying them for use in their PEVs I think they went another direction. I was keeping them for an HV awd build, but… i have shown not to build things so they are available to someone who needs them more than me.
#8 EnertionUSA Unity
New, opened box. I got these from EnertionUSA for a yet another build i seem to never get to, I opened the box to ensure they worked. I did motor detection with them and that’s it. put it all away in the box after. not sure i want to sell them but they are available if someone needs them now more than me.
#9 Nano Remote and Receiver
#10 Enertion Nano Remote and Receiver
Note: this one is failing to charge. red light flashes fast. I suspect that means battery is bad. Pick it up with one of the other ones as spare guts… or replace the battery.
comes with receiver which I just tested today it works.
#11 Land Surf HammerHead remote and tranceiver.
Note the charge light on this one never worked after the mod. it charges but the red light doesn’t come on while charging.
This is a 3d printed case mod for the Nano remote guts. Designed by Land Surf.
this one has enertion nano remote guts.
i really liked this one. but without a trigger guard i bumped it too frequently.
#12 MBS Truck, extra hangar, risers.
MBS truck + 2nd truck free only missing toptruck/baseplate.
1 hangar srapped concrete, see pics.
replacement washers and nuts are not black. see pics.
#13 Stooge Race Boards (SRB) 3-link trucks
Standard 3-link trucks, (non HD)
the axels are brand new unused.
motor plates are 30mm spacing. ( i ran 44mm spaced motors diagonally )
include second set of motor plates and cross bar. these are the smaller ones that mainly work with the stooge gear drives.
#14 2.4ghz mini remote and receiver
bought this to play with the classic esk8 remote. didn’t get around to it. never used it.
#15 HTD-15-5 Belts POWGE
length | width | pitch | qty | |
---|---|---|---|---|
365 | 15 | 5 | 3 | |
405 | 15 | 5 | 4 | |
470 | 15 | 5 | 5 |
#18 Land Surf Axle Nuts V1 M12 Black x4 (new)
#19 Land Surf Deez Nuts V2 M12 Black x4
#20 Land Surf Axle Nuts V1 M12 Red x4
#21 Land Surf Axle Nuts V2 M12 Red x3
NOTE I lost one of these. so there’s only 3
#22 YZPower-450 12s 6A charger
has a dc5.5 connector. but you can put whatever you need on it.
#23 Pair of Flipsky 6374 190kv Battle Hardened motors 8mm shaft
#24 Pair of Flipsky 6354 190kv Battle Hardened motors 8mm shaft
#26 FreeSK8 OSRR Bruce and receiver
For reasons related to my builds and my time to mess with things, I haven’t been using this unobtanium remote. So it should go to someone else who will.
Also it’s too big for my gloved hands. Smaller models were supposed to arrive someday.
#27 Metr Pro Unity
This metr pro fits neatly in the unity/xenity. but with the right skills an adapter cable can plug it into any vesc.
#28 Moon Drive mounts for MBS Matrix II trucks
#32 Pair of SRB 78T Spur Gears
#33 Freesk8 Xenigotchi / Robogotchi + GPS
Sold out everywhere!
Xenigotchi automatic always on data logging, and bluetooth dongle.
Designed to fit neatly in the BKB Xenith or the Foxbox Unity, (or shudder the tenka)
with the right cable it could also be used with any vesc.
Includes the separately sold gps module and unused gps case.
#34 set of 4x MBS rockstar II hubs, + 2x 62T pulleys used
4x hubs, 2x 62T lacroix pulleys. (using 13mm spacers on 55mm bolts)