[WTS] [US] Fess Sells: Redember NorthCamp, 10mm bore pulleys, 2x MBS hubs, Belts, std SRB Motor plates ... For SALE

The List

# item cond price
15 HTD-15-5 Belts!! new $3.50ea $3.00ea + $4 shipping (US, bundled)
17 set of 2 MBS rockstar hubs new $22 $20 $16 $14 $12 shipped (US) :man_supervillain: :moneybag:
25 Redember Northcamp and @BigBen Enclosure new $600 $598 $596 :eyes: :woozy_face: shipped (US)
29 SRB 30mm Standard motor plates used $30 $25 $22 $18 shipped (US)
30 Pair of Lacroix 20T Titanium pulleys 10mm used $25 $20 $18 $16 shipped (US)
31 Pair of 15T Aluminum Pulleys 10mm used $15 $13.50 $10 $8 shipped (US)
35 … more to come?

I take venmo, paypal, can work out other stuff if needed.
pls add fees if opting for buyer protection

When you DM please be so kind as to change the subject to the item you’re requesting. ty,

Pics

open/close pictures

#15 HTD-15-5 Belts POWGE

I figure i see people randomly looking for a quick belt and i have a bunch “in stock” might as well list them in case it helps.

length width pitch qty
365 15 5 2
370 15 5 2
405 15 5 1 (prototipo)
435 15 5 1
440 15 5 8
445 15 5 10

More

[/details]

#17 Set of 2 MBS rockstar II hubs new. (sans bolts)

These were never used.
Now with bolts.

Break on thru to the other side

#25 Redember Northcamp and @BigBen Enclosure (new)

Kept in the plastic wrap. Haven’t gotten around to building it.

enclosure is about 9 x 9 in 21700 p42as doublestack.
66cm x 19cm x 5cm

The smallest battery you’d do is probably 14s8p and if you’re good at packing and move the ESCs to the outside 18s9p

see pics in the more section.

More

#29 SRB 30mm Standard motor plates

Not purty but fine with some cleanup and paint. no cross bar included.
for standard axle not HD.

definitely inspect the more pics

#30 Pair of Lacroix 20T Titanium pulleys

20T
10mm bore
w/ keyway

Note! these do not have holes for grub screws, lacroix held them in place with circlips.

sry they have not been cleaned up. :grimacing:

More Pics

#31 Pair of 15T Aluminum Pulleys

15T
10mm bore
w/ keyway

more pics


Sold

show me the sold stuff
# item cond price
1 DieBieMS batch 3, new $120, $99, $79 shipped (US)
2 @IDEA v7 motor mounts with idlers for MBS matrix II new paid $183, $99 shipped (US)
3 @IDEA 72T wheel pulleys with MBS hole pattern new paid 133 $69 shipped (US)
4 12s BMS pulled from mboard battery :scream: used $9 shipped $0 + shipping (US)
5 12s Lacroix Lonestar BMS (OG) used $17 $10 shipped $0 + shipping (US)
6 Pair of Boosted Motors for repair. wobbly shafts. needs service $10 shipped $0 + shipping (US)
7 2x Lacroix Stormcore 100D used $325ea shipped (US)
8 EnertionUSA Unity (no blood) new $300 shipped (US)
9 Nano remote and receiver used $0 + shipping (or $5) (US)
10 Enertion Nano remote and receiver used $0 + shipping (or $5) (US)
11 Land Surf HammerHead Remote (enertion nano guts) used $10 shipped $0 +shipping (US)
12 MBS Matrix II truck, + bonus hangar used $35 shipped (US)
13 Stooge SRB 3-link trucks w/ new axels and extra motor mounts used $295 shipped (US)
14 2.4ghz mini remote and receiver new $15 $12.50 shipped (US)
18 Land Surf Axle Nuts V1 M12 Black x4 new $16 $12 $8 shipped (US)
19 Land Surf Deez Nuts V2 M12 Black x4 used $18 $14 $10 shipped (US)
20 Land Surf Axle Nuts V1 M12 Red x4 used $14 $10 $6 shipped (US)
21 Land Surf Axle Nuts V2 M12 Red x3 used $9 $5 $0 + $3 shipping (US)
22 YZPower-450 12s 6A charger new $44 shipped (US)
23 Pair of Flipsky 6374 190kv Battle Hardened motors 8mm shaft new $214 + ship $190 $170 $153 $138 $125 shipped (US)
24 Pair of Flipsky 6354 190kv Battle Hardened motors 8mm shaft new $150 + ship $140 $126 $115 $104 $94 shipped (US)
26 FreeSK8 OSRR Bruce and receiver used $310 $290 shipped (US)
27 Metr Pro Unity used $40 $35 $30 shipped (US)
28 Moon Drive mounts for MBS Matrix II used $20 $17 $15 $12 shipped (US)
32 Pair of SRB 78T Spur Gears used $65 shipped (US)
33 Freesk8 Xenigotchi / Robogotchi + GPS used $90 $45 $40 $34 shipped (US)
34 set of 4x MBS rockstar hubs + 2x 62T pulleys used $60 $54 shipped (US)

#1 DieBieBMS

#2 @IDEA v7 MBS motor mounts with idlers

more



#3 @IDEA 72T wheel pulleys

more

(other side)

#4 12s mboard bms

more

#5 12s BMS, lacroix lonestar

more

#6 pair of boosted motors, need service, wobbly shaft

more

note video of shafts, one is worse than the other. motors work.

#7 Lacroix Stormcore 100d (x2)

Update, these are apparently an early batch stormcore. (first batch?) No 100D marking on the sides. no version info on the pcb. be aware of this. first one was stress tested by the buyer. said it was good.

Note just the stormcore what you see in the pics. I don’t have the power buttons to go with em.

I got these from a PEV company that was trying them for use in their PEVs I think they went another direction. I was keeping them for an HV awd build, but… i have shown not to build things so they are available to someone who needs them more than me.

more

#8 EnertionUSA Unity

New, opened box. I got these from EnertionUSA for a yet another build i seem to never get to, I opened the box to ensure they worked. I did motor detection with them and that’s it. put it all away in the box after. not sure i want to sell them but they are available if someone needs them now more than me.

show

#9 Nano Remote and Receiver

#10 Enertion Nano Remote and Receiver

Note: this one is failing to charge. red light flashes fast. I suspect that means battery is bad. Pick it up with one of the other ones as spare guts… or replace the battery.

comes with receiver which I just tested today it works.

#11 Land Surf HammerHead remote and tranceiver.

Note the charge light on this one never worked after the mod. it charges but the red light doesn’t come on while charging.

This is a 3d printed case mod for the Nano remote guts. Designed by Land Surf.
this one has enertion nano remote guts.

i really liked this one. but without a trigger guard i bumped it too frequently.

#12 MBS Truck, extra hangar, risers.

MBS truck + 2nd truck free only missing toptruck/baseplate.
1 hangar srapped concrete, see pics.
replacement washers and nuts are not black. see pics.

more

#13 Stooge Race Boards (SRB) 3-link trucks

Standard 3-link trucks, (non HD)
the axels are brand new unused.
motor plates are 30mm spacing. ( i ran 44mm spaced motors diagonally )
include second set of motor plates and cross bar. these are the smaller ones that mainly work with the stooge gear drives.

more

#14 2.4ghz mini remote and receiver

bought this to play with the classic esk8 remote. didn’t get around to it. never used it.

#15 HTD-15-5 Belts POWGE

length width pitch qty
365 15 5 3
405 15 5 4
470 15 5 5

#18 Land Surf Axle Nuts V1 M12 Black x4 (new)

More

#19 Land Surf Deez Nuts V2 M12 Black x4

More

#20 Land Surf Axle Nuts V1 M12 Red x4

More

#21 Land Surf Axle Nuts V2 M12 Red x3

NOTE I lost one of these. so there’s only 3

More

#22 YZPower-450 12s 6A charger

has a dc5.5 connector. but you can put whatever you need on it.

More

#23 Pair of Flipsky 6374 190kv Battle Hardened motors 8mm shaft

more

#24 Pair of Flipsky 6354 190kv Battle Hardened motors 8mm shaft

More


#26 FreeSK8 OSRR Bruce and receiver

For reasons related to my builds and my time to mess with things, I haven’t been using this unobtanium remote. So it should go to someone else who will.

Also it’s too big for my gloved hands. Smaller models were supposed to arrive someday.

More Pics

#27 Metr Pro Unity

This metr pro fits neatly in the unity/xenity. but with the right skills an adapter cable can plug it into any vesc.

More

#28 Moon Drive mounts for MBS Matrix II trucks

More Pics!

#32 Pair of SRB 78T Spur Gears

7F15BDE7-A2B3-406E-991D-8F7AB3EF3421_4_5005_c

More PIcs

#33 Freesk8 Xenigotchi / Robogotchi + GPS

Sold out everywhere! :grinning: :stuck_out_tongue_winking_eye:

Xenigotchi automatic always on data logging, and bluetooth dongle.

Designed to fit neatly in the BKB Xenith or the Foxbox Unity, (or shudder the tenka)
with the right cable it could also be used with any vesc.

Includes the separately sold gps module and unused gps case.

#34 set of 4x MBS rockstar II hubs, + 2x 62T pulleys used

4x hubs, 2x 62T lacroix pulleys. (using 13mm spacers on 55mm bolts)

More

9 Likes

Motor mounts sold.

2 Likes

Added remotes and BMSes and dropped some prices.

1 Like

1 stormcore sold, 1 pending.

1 Like

Ill take enertion remote and reciever

1 Like

added more details on Enertion Nano remote, Land Surf Hammer Head remote, and stormcores

2 Likes

enertion nano, and regular nano remotes sold.

1 Like

idea pulleys sold.
drop price to 0 on hammerhead.

1 Like

boosted motors gone.

damn. so much for adding stuff every week. :smiley:

at least i sold something without even posting. box of 200 molicell p42a $800

3 Likes

dm sent

1 Like

Added 1.5 MBS trucks

2 Likes

Dm’d about trucks. :grin:

2 Likes

MBS trucks sold. someone sniped in even before @nclayton

1 Like

Added 3-link trucks.

1 Like

Messaging you fess

2 Likes

3-links sold.

3 Likes

giving away the hammerhead. updated price.

1 Like

Pm inbound

1 Like

Hammerhead sold.

mboard bms sold.
image

lacroix bms sold.
image

2 Likes