You think the silver 210 Tito’s will work on an interstellar?
I was thinking of getting 240mm for a prototipo 
1 Like
I’ve got a set you can test fit if you were interested. Not currently mounted on anything.
2 Likes
Dont see why not
1 Like
Wheel bit I suppose but I’m sure it’s fine
Do it 
1 Like
@CHADFARTHOUSE deals on Dualitys here
1 Like
Ive been looking believe me thanks for the ping I really appreciate it!, I may pass on these and let someone else get this awesome deal
I need to inquire with tito about drivetrain fitment with 6485 skps + Boardnamics M1-AT maybe plus would like inquire about a red anodization to keep some of the metroboard theme going strong
i also need to figure out the difference between standard offset and centerset
3 Likes
Items sold:
- Silver dualities
- All 3 Stormcores
- Hobbywing ESC
- Hobbywing OTA Programmer
- Cardo Packtalk Black
I may or may not have something for u there
1 Like
Its on his website about drive train compatibility. For 6485s and boardnamics gear drive, you’ll need the 300mn hangers.
I asked Tito about red anodizing
Centerset is lower and slightly longer wheelbase, I’d recommend over offset
I think @fess has this setup on 270mm hangers. The motor to baseplate clearance is so small idk if we had to space it out. 300mm is safer bet for that particular drivetrain. If doing custom adapters maybe can push motors slightly further apart.
Custom anodizing is too expensive. At least the shop nearby it’s around $200 per batch minimum.
Pretty sure you want the 300s for full articulation of the trucks
(finally got time to reply)
Looking absolutely gorgeous, so happy it being put to good use. Next race of (hopefully) esk8con, would love to see it again to give it a demo cruise if u dont mind
Bump with price drops:
Mad 3-Links - $200
Kynd deck - $200
Exway Remote - $30
Triple 8 Puck Gloves - $20 for both
And if by chance anybody’s interested in never used, fresh red CST trucks from Moe along with an MBS Apex deck, I got word from @esk8.speedster about stuff of those sorts to be posted on here for sale. Official photos and prices coming soon
I bet this is so fun to ride….
I’ve been thinking about getting 3 links. How do they feel compared to dkp? Do they mitigate speed wobbles? Can you also put urethane on them, I’ve only seen pneumatics on them.
3-links are essentially dkp without the snap back. They do not mitigate speed wobbles but reduces them enough that it can be ridden to 70+ mph, worst case scenario there is one singular wobble and is very easy to save
You can put 90mm wheels on them, but I’d recommend at least 105mm mad or dadbods. Mad max are perfect tbh, it pairs perfectly with my dadbod build
Yeah it’s a lil beast, 14s4p with a d100s and 205 kv motors. Things a rocket ship, it’s on an original vx4 and the pot is going out so it’s a lil sketch rn
1 Like