Hey guys,
I recently finished welding these into an 18s7p configuration, but after a test fit in my Ramm Paragon build (details here: https://forum.esk8.news/t/project-redline-a-ramm-paragon-build/91258/47), I realized the fit is just a little too tight for my comfort.
Rather than taking the groups apart and grinding them down (I’ve seen it done, just not a fan of the idea), I’ve decided to take the loss and move forward with a 6p build instead.
So I’m seeing if anyone would be interested in picking up some ready-made 7P groups.
Details:
-
17 usable P-groups of 7 × EVE40PL cells
-
Cells are brand new, never run
-
Glued and wrapped in fish paper
-
0.2mm MBoards nickel welded
-
Welded using a solid kWeld setup
-
No blow-throughs
-
Some weld alignment isn’t cosmetically perfect, but structurally they looked good
One note: I had to cut these 7p groups out of an 8p layout, so the middle nickel tabs are slightly staggered. Also, the nickel tabs themselves felt a bit short to me, but plenty usable.
I’ll send detailed photos of each group prior to purchase so you can review weld quality yourself. I also have 2 extra groups that I can either include in the deal or tear apart to demonstrate weld strength (nickel peel test) if that gives you more confidence.
Starting price: $250 - I am willing to split shipping costs.
Let me know if you’re interested or want more pictures.
