[WTS] [EU/DK] - EVERYTHING SOLD!

Hey everyone!

I got some cool stuff for sale :slight_smile: Everything is basically brand new!

Everything is located in Denmark, Europe.

Prices are listed below the item headline, but offers are also welcome!

Please let me know if you have any questions. I can also add more pictures if requested :slight_smile:

All payments will be done in DKK (Danish kroner) via PayPal!
All prices are WITHOUT shipping.

Hope you’ll enjoy the picture and have a lovely day! :slight_smile:


Deck has been sold!

1x Landyachtz Evo Spectrum 40"

  • Retail price: 185€ / 1375DKK
  • Asking price: 125€ / 930DKK

Condition: Brand new, only mounted

Description:
It’s a brand new Evo 40". It has some marks around the truck mounting holes from the screws when the trucks were installed.


Maytech 6374 190kv has been sold!

1x Maytech 6374 190kv motor with 1x keyway & 2x c-clips

  • Retail price: 140€ / 1040DKK
  • Asking price: 90€ / 670DKK

Condition: Brand new, only mounted

Description:
It has never been connected to power, however it runs completely fine when spinning it by hand.
I’ve also done the motor test where you put the phase wires together and that makes the motor act like it applies the brakes and that also works perfectly.

There are also 1x keyway and 2x c-clips included, as you see in the pictures.


Flipsky VX2 Pro has been sold!

1x Flipsky VX2 Pro

  • Retail price: 67€ / 500DKK
  • Asking price: 40€ / 300DKK

Condition: Brand new, only turned on

Description:
It has never been connected to a VESC, however it turns on completely fine and I’m able to change all the settings in the menu.

It’s the VESC6 version, but I’ve also included a cable in case you want to make it work with VESC4. All you have to do, is swap some wires around and change it in the settings.


Abec 11 97mm has been sold!

1x set of ABEC11 97mm 74A ReFly wheels with SKF bearings & spacers installed

  • Retail price: 130€ / 970DKK + bearings & spacers
  • Asking price: 70€ / 520DKK

Condition: Used for less than 100km

Description:
They have SKF 608-2RSH bearings installed with a spacer in between.


E-Caliber trucks has been sold!

2x E-Caliber trucks with various bushings, spacers & 4x risers

  • Retail price: 70€ / 520DKK + extras
  • Asking price: 50€ / 375DKK

Condition: Brand new, only mounted

Description:
One truck has some marks from the motor mount

I don’t really know much about the bushings other than they are 88A and 92A, but no clue which ones are what…
Stock bushings are NOT included, however all the other things you see in the picture, are included.


Motor mount has been sold!

1x EskateTech Carbon motor mount with 2x sets of motor mounting bolts

  • Retail price: 55€ / 405DKK
  • Asking price: 15€ / 110DKK

Condition: Brand new, but modified a bit

Description:
It’s an enertion style mount. It works with the E-Caliber trucks and on the website it says Caliber trucks in generel.

2 screws have been sanded down a bit to make a belt fit better.

2 sets of motor mounting screws are included, as you can see in the picture.


3DServisas X-plates has been sold!

1x set of 3DServisas X-plates in black

  • Retail price: 18€ / 130DKK
  • Asking price: 10€ / 70DKK

Condition: Brand new, only mounted

Description:
They’re brand new as seen in the picture.


Pulley's have been sold!

1x 16 teeth & 1x 15 teeth motor pulley

  • Retail price: 20€ / 150DKK
  • Asking price: 5€ / 35DKK

Condition: Brand new, only mounted

Description:
The 15 teeth motor pulley uses a keyway to lock in place.
The 16 teeth motor pulley uses 2 screws, that screws down into the keyway slot.

I’m pretty sure both are made of steel.


Bag with lots of truck mounting hardware has been sold!

1x bag with lots of truck mounting hardware

  • Retail price: 10€ / 70DKK
  • Asking price: 3€ / 20DKK

Condition: Brand new, only mounted

Description:
You get what you see in the picture. They use hex keys.

The short bolts are 35mm and the long ones are 45mm.


Belt has been sold!

1x HTD-5M 275mm belt

  • Retail price: 5€ / 35DKK
  • Asking price: 1€ / 7DKK

Condition: Brand new, never used

Description:
It’s a belt…

1 Like

@rusins ecaliber trucks

3 Likes

I’ll take the x-plates and truck mounting hardware, sending DM.

1 Like

@Franky the wheels :slightly_smiling_face:

1 Like

interested in the remote pm incoming~

1 Like

Interested in the trucks and motor.
Edit: and bought.

1 Like

I use these a lot, but I’m on the wrong side of the pond

1 Like

To the top :slight_smile:

Bump. No one is looking for an Evo?

Offers are also welcome :slight_smile:

Bumper

1 Like

Prices have been updated :slight_smile:

1 Like

Still surprised that no one took the evo yet

4 Likes

Bump :slight_smile:

Are motor mounts for sale

1 Like

Yes it is.

What size motors fit these? And do they fit tourqboards 218mm trucks

First, it’s just ONE motor mount :slight_smile:

And unfortunately I don’t think it will fit on TB218 unless you sand the truck a bit down which I’ve done before and is totally possible. Just take your time and be careful.

image

Heck I want that deck OP but I’m closely watching expenses atm! :weary:

2 Likes

I want the deck, but I don’t need the deck as I’m already waiting on a haero board from the 3rd batch. Since I can get it for cheaper on my next trip to the States for 115€ with free shipping, so I’ll offer you 100€ and see if we can meet for local pickup when I’m driving through Denmark next week.

1 Like

I’m sorry, but I’m not gonna sell it for 100. As of right now I’ll keep the price at 135 EUR.

I believe the price difference in the EU compared to the US is due to taxes, shipping etc.

Thanks a Lot for the offer though :smiley: will keep it in my mind :slight_smile:

2 Likes