USA Misc parts, gear drives, motors, trucks, wheels etc

Located Portland OR USA

15t motor pulleys, 10mm D shaft, for 15mm belts - $10

Radium 78t pulleys - brand new never used, comes with bolt spacers. SOLD

Newbee 4GS 5:1 with Flipsky 6374 190kv installed, Luna 350 clamps - used a couple times, works great. $400 shipped in US.

Boardnamics XL motor mounts - Newest revision(motors can slide in/out for easy install without removing motor pulleys), comes with all hardware, used only for about 5 minutes. - SOLD

Moon Eskate 15 degree truck baseplate (fits all Caliber II style trucks), has Riptide pivot cups and 2 90a Riptide barrel bushings included - $80 shipped

Boardnamics adjustable baseplates, brand new, newest revision $50 for one, $95 for both

Boardnamics 6384 190kv motors, battle hardened, 8mm stepped shaft with keyway. Installed on geardrives and removed, never ridden. - $240 shipped

Boardnamics M1-AT 4.6 ratio gear drives, Apex/Luna mounts, brand new, never ridden. Was assembled and ran motor detection. Just install the motor gears on your motors and go. SOLD

Boardnamics BN270 hangers - SOLD

Boardnamics 48/33 split angle precision baseplates, ridden for 5 minutes - 65 shipped

TB110 72a blue wheels, used in good condition - $80 shipped

Hoyt St. 5" pneumatic tires/tubes/rims/pulleys with 10mm bearings, brand new(swap bearings if you have 8mm axles) - SOLD

Randal baseplates:
R-II 50* x2
R-II 42* x1
DH-35 35* x1
$12 each,

2 Riptide Randal pivot cups $10

Boardnamics kegel 44T pulleys, - SOLD

Boardnamics ABEC 40T pulleys, brand new - $50/pair

Boardnamics 40T pulleys without Kegel/ABEC part, $20 pair

Boardnamics caliber II 63mm motor mounts with all hardware and clamps, center distance 56-68mm SOLD

Boardnamics Caliber II 63mm idler motor mounts. Belt tension is adjusted by idler, fixed 90mm center to center motor distance. Modified mounts by cutting 27mm hole so motor can be installed and removed without removing motor pulley from shaft. Doesn’t come with clamps/hardware. $40

New belts
HTD295-5M belts, $3 each, 2 available
HTD275-5M belts, $3 each, 6 available
HTD325-5M belts, $3 each, 2 avaliable
HTD380-5M belts, $9 each, 2 available

Lacroix Hoyt midnight puck case, brand new $20

Newbee wheel bearing spacers 4x 22mm long x 10mm ID x 16mm OD for 10mm truck axles, $13 shipped

Riptide longboard 0.6" bushings:
93a red WFB Barrel x2
93a maroon Krank Barrel x2
96a grey Krank Barrel x1
90a green Krank cone x1
88a yellow WFB Cone x1
$4 each

Psychotiller Recoil deck, 40x11.1, 1" radial drop, 10 ply, Vicious grip, comes with enclosure installed using m4 titanium hardware. Fits 12s4p 21700, smart BMS and single VESC such as Stormcore 60D - used, $250



















190KV-scaled

9 Likes

Pming

You have no money.

14 Likes

You’re right. That’s why I’m asking about the $5 puck shell.

4 Likes

BN adjustable baseplates sold

3 Likes

Nice Dyson vacuum! mine sucks!

Board and parts are nice also

2 Likes

Haha it makes up for sucking with convenience

1 Like

Caliber 2 non-idler motor mounts sold

3 Likes

Added new parts -

Boardnamics M1-AT 4.6 ratio gear drives, Apex/Luna mounts, brand new, never ridden. Needs one new motor gear as one that came with it was mfg’d with a loose tolerance. Probably rideable but will make a click sound. BN will replace gear for free if their customer service is good. $250 shipped

Boardnamics BN270 hangers , used - $100 shipped

Boardnamics 48/33* split angle precision baseplates, ridden for 5 minutes - $61 shipped

TB110 72a blue wheels, used in good condition - $80 shipped

Psychotiller Recoil deck with enclosure - $250 shipped

2 Likes

Added -

Boardnamics 6384 190kv motors, brand new. Installed onto gear drives and ran motor detection. Never ridden. - $235 shipped

1 Like

Added -

Propulsion Boards (Flipsky) 6374 190kv battle hardened motors, 10mm D shaft, 25mm length, 15T pulley, used lightly for 18 months and work perfectly - $150 shipped

1 Like

I’m interested in the motor mounts w/ idler wheels, and I’m in Portland too.
Likely interested in the 6374 used motors too

Those still available?

1 Like

Yes sir they are available for now. I’m firm on all my prices so $200 for the motors and motor mounts. LMK if you want to meet sometime

Added -

Moon Eskate 15* truck baseplate(fits all Caliber II style trucks), has Riptide pivot cups and 2 90a Riptide barrel bushings included - $50 shipped

3 Likes

Thanks for the quick response
Looks like your prices include shipping, any less for pickup?

2 Likes

I can take off the $10 shipping, so $190

I’ll take it. Thanks!
PM incoming so we can arrange pickup.

Are the Hoyt St. 5" still available?… :eyes:

2 Likes

Added:

Boardnamics XL motor mounts - Newest revision(motors can slide in/out for easy install without removing motor pulleys), comes with all hardware, used only for about 5 minutes. - $75 shipped

1 Like

SOLD Hoyt 5" wheels