Hey, do you have exact dimensions of the battery?
I’m not home to measure exactly but per @BluPenguin the pack is About 450mm long, 138mm wide and about 21mm thick ( the BMS is currently on top of the battery adding another 5-6mm to the height at one end ) the shrink wrap can be be cut and the BMS can be laid separately.
If any of this made sense. I can get exact dimensions and photos tonight.
TB110’s added.
Traitor
When plan A don’t follow through
Plan B is decided
Also, 100$ for 2 motors was too good a deal for me
Holy shit yeah it was a good deal haha.
You still want to look at my motors or no?
Same price?
What are the dimensions on that battery?
Was just mentioned a few post above
I’m not home to measure exactly but per @BluPenguin the pack is About 450mm long, 138mm wide and about 21mm thick ( the BMS is currently on top of the battery adding another 5-6mm to the height at one end ) the shrink wrap can be be cut and the BMS can be laid separately.
If any of this made sense. I can get exact dimensions and photos tonight
Makes sense, my bad, just missed it through all the motor stuff.
Yeah man no worries, a lot going on i understand.
Lol fuck you too buddy
If somebody grabs those mounts and wants to swap 40t for 36t janux pulley hit me up, I need the 40t
I mean you can buy the mounts
Ugh I already have 2 WIP boards, both 10S4P, wanting to play with a 12S4P as well. Fiance will probably kill me if I start another.
someone buy it so I don’t
doooo it… come on ya know ya want too.
Added pictures of motor mount kit will also come with enclosures
Added photos of battery, with power switch and charge port. Will also come with 2 4a chargers