the point of the v on a tire tread should be the first part that touches the ground – that way it pushes water etc to the outside.
so from your photo the left one when the board is belly up is backwards
the point of the v on a tire tread should be the first part that touches the ground – that way it pushes water etc to the outside.
so from your photo the left one when the board is belly up is backwards
Fixed it
looks great Filip!
if i’m not mistaken the TB tyres are intended to be reversible one direction is for street and the other for AT. whats important is they are both facing the same direction.
Good to see the old enclosure going strong!
Its simply perfect for this deck and my battery so why switch?
Just waiting for my connectors to arrive before I can do anything
this looks a lot like severe wheelbite to me so far, are you going to add risers or widen the wheelbase ?
im facing a similar problem and not yet sure how i wanna cope with it
I have to turn very hard for it to bite If it becomes a problem I will modify the deck
Where did you buy those tyres?
sweet setup btw. I just finnished building my efoil. Now i ll start with an eskate project. The water is too cold for testing + the quarantine
Welcome to the forum, man.
If you like, come tell us more about yourself here:
Theyre pretty perfect to me minus they don’t work worth dick on shoulder bolts because there’s no inner race that goes all the way through the wheel + pulley.