Mark One Deals: For Esk8.news updated 14/04/20 (BOA CONSTRICTOR 100MM WHEELS)

Hi all,

In this topic I will post discounted items exclusively for Esk8.news members

Mark One Boards is also official dealer for: MBS, TSG and has acces to alot of decks, wheels, protection, etc…

If you are looking for a certain item let me know and I will have a look if I can offer that item cheaper then the general retail price.

We work with distributionhubs and do NOT carry every single item in stock, this is just impossible due to the sheer amount of possible products we can offer.
This way we also do not have to deal with stockingcosts etc… so we can mostly offer a better price.

If you have questions or remarks please let me know :slight_smile:

4 Likes

In this thread you will find all deals from Mark One Boards that are exclusively for Esk8.news members
For our normal shop >click here<

Powell Peralta Kevin Reimer Samurai deck: sold out!

A bit of info about the deck itself:

The Samurai is a pure bred race and freeride board developed by 2009, 2010, and 2014 Downhill World Champion Kevin Reimer.
The goal of the Samurai is simple: to be the fastest and easiest to ride downhill board available today. The Samurai has a 3/8 inch drop that will hold you in place for sliding, drifting, or freeriding and also features a flat-topped W concave that is meant to be subtle enough to not effect pushing, but noticeable enough to hold your foot on toeside corners and slides.

Many of todays downhill and freeride boards have intense concave that hurts your feet and in fact hinders your skating, and the Samurai has the opposite of these extremes.
The concave of the Samurai is more gentle and round than other concaves which allows for more foot contact with the board, meaning more grip, more control, and less feedback that can slow you down. The Samurai has been built with the least amount of material possible in order to keep the deck extremely light weight, and allow the use of large race wheels without wheel bite.

FEATURES

  • Ultra lightweight construction for quicker starts and response
  • Gentle radial concave, for more foot contact
  • Flat top W concave
  • Extremely stiff torsionally with gentle longitudinal flex
  • Integrated cast urethane bumpers
  • 3/8 inch drop to glue your feet to the board while sliding, and lower your center of gravity
  • Race shape with wheel clearance for 75mm and up wheels

Specs

Length: 93.3 cm / 36.75”
Width: 25.4 cm / 10”
Wheelbase: 73.7 cm / 29”.
Construction:

  • Tri-axial fiberglass
  • High strength epoxy glue
  • Super light, multi-species wooden core
  • Hard, cast polyurethane bumpers
  • Much love and sweat

Gripped: No.
Artwork: Original artwork created for Kevin Reimer by V.C. Johnson

Note: this deal is only for esk8 news members and these boards are almost out of stock so if you are interested you can message me here or at info@markoneboards.com

Shipping can be worldwide but price is WITHOUT shipping
Shipping cost will depend on the country of the buyer
For buyers from Australia, the shipping cost is €65 take this in consideration (no clue why its so expensive, its ridiculous honestly)

2 Likes

It can only fit a 90ish mm wheel due to bite, just so people understand.

You can however get a 12s5p on there comfortably.

Main issue is enclosure, I don’t believe anyone makes one so they would need to be self fashioned. that concave will make it interesting.

2 Likes

Good info for buyers Brent :slight_smile:
Everytime I see something interesting which I can do a deal on I share with you guys :slight_smile:

1 Like

I suggest you add these deals to your shop thread as you might catch some animosity from the forum for multiple threads.

I’m practically frothing from the vagina here trying not to call you a twot.

9 Likes

Can fix that with risers though, can you not?

Personally though I like to avoid risers when I can.

5 Likes

Good idea, im still new on here so did not know about making a shop thread.
I will do that then and post all deals there, I will also make a section in the shop only for esk8news members.

2 Likes

I could give it a go if I could get my hands on a deck?

7 Likes

Call it something like “MarkOneBoards Shop: Deals & Updates”

That would be more acceptable than multiple threads :slight_smile:

2 Likes

Deal for Esk8.news members:

ABEC11 Super Fly 107mm: SOLD OUT

Specs

Durometer: 74a Black

Diameter: 107 mm

Width: 64 mm

Contactpatch: 55 mm

Offset

Lip: Round

Surface: Non Stone Ground


Note: without shipping, shipping will be calculated based on your country*

For orders message me here or send an email to: Info@markoneboards.com with:

  • Full name
  • Shipping adress
  • Email adress
  • Followed by payment trough paypal to info@markoneboards.com
    (other payment methods are possible too but I prefer paypal for the buyer protection)
3 Likes

Deal for Esk8.news members:

Landyachtz Wolfshark “Wolf and Shark” Reissue - Deck Only Sold Out
Only 8 available!

Length: 90.2 cm / 35.5”
Width: 25.4 cm / 10”
Wheelbase: 57.7 cm - 70.4 cm / 22.7” - 27.7”.
Construction: Hollowtech, 6 plies of maple and 2 plies of fiberglass.
Griptape Included: Yes.

Note : without shipping, shipping will be calculated based on your country *

For orders message me here or send an email to: Info@markoneboards.com with:

  • Full name
  • Shipping adress
  • Email adress
  • Followed by payment trough paypal to info@markoneboards.com
    (other payment methods are possible too but I prefer paypal for the buyer protection)
    [/quote]
1 Like

@moon

The problem is that i already have 2

6 Likes

I do want one buuut dis :expressionless:
product_Landyachtz_2013_Wolfshark__Set_

3 Likes

Deal for Esk8.news members:

Triple Eight Racer Downhill Longboard Helmet SOLD OUT

  • Meets CPSC 1203 bike and ASTM F1952 downhill mountain bike racing standards
  • Meets CE EN 1078 Helmets for pedal cyclists and users of skateboards & roller skates

Introducing the first ever Triple Eight Downhill Helmet crafted for speed.
The streamlined T8-Racer is the downhill helmet to turn to for uncompromised exhilaration. You, the board, the T8-Racer Helmet and the street. Be a part of the connection.

• Meets CPSC 1203 bike and ASTM F1952 downhill mountain bike racing standards
• Hand-laid fiberglass shell
• Shatter-resistant flip-up visor
• Aerodynamic styling to limit wind resistance
• EPS foam liner with velvet lining
• Each helmet comes with an extra pad insert to customize fit
• S/M weighs: 989 grams & L/XL weighs 969 grams

*Note : without shipping, shipping will be calculated based on your country *

For orders message me here or send an email to: Info@markoneboards.com with:

  • Color and Size (For S/M only white available) (Available sizes: XXS/XS, S/M, L/XL)
  • Full name
  • Shipping adress
  • Email adress
  • Followed by payment trough paypal (no F&F) to info@markoneboards.com
    (other payment methods are possible too but I prefer paypal for the buyer protection)

Sumthin like dis?

I actually really like the reissue shape.

9 Likes

Don’t tempt me, uuu :smiling_imp:

4 Likes

If I could I would make a discount for it, but unfortunately the 2013 shape like that isn’t in stock anywhere.
Sorry guys

1 Like

Access to any moonshine decks?

2 Likes

yes I am also retailer for moonshine, which one are you interested in? @Skunk