makerX GO-FOCSV6 ESC Install

[frame]

first off, welcome

@boulderboy

This esc fits my build nicely

depends on ur enclosure

@boulderboy

This ESC requires soldering upon install

not exactly, they comes with 5.5mm bullets for motor and XT60 for batt

@boulderboy

If it does require soldering, is there a well-priced alternative that would fit my build similarly or better? Preferably located in US.

see above

@boulderboy

how tf do I go about soldering

this is a general soldering guide:

[Serious] How To Solder | Soldering Guide | The Complete Tutorial From A>Z

Here is a tutorial on how to solder. We will discuss everything from how-tos, what tools and tips & tricks. - Here is a list of what you need. Tools | What you actually need"] First off, a soldering iron, not a pistol. Basically a long stick with a metal rod. Solder. It needs to be 60/40 that has a rosin core. People use 63/37, it is personal. Flux Helping Hand/soldering Jig Brass coil/or just use a damp cloth that you don’t need. Desoldering Braid - Sooooo many soldering irons! Which on…

@boulderboy

Flipsky BLDC 6384 190kv

if u send flipsky an email, they can probably put 5.5mm bullet on it, so u don’t need to solder

u can ask in the noob thread, plenty of experts hanging around there

---

@boulderboy

someone who does not wish to be named on the new forum (??)

Leon?