Buyer pays PayPal fee shipping, US lower 48 shipping only.
Located in Orange County, California. local pickup available to all items.
SOLD ITEMS
- SOLD
Condition: Brand new, never used, bolted on some trucks to test. No holes/inserts on entire deck
Real carbon fiber, flytrap original graphic, medium frit. have to give up the project, battery too big to use this deck, 2015 and before EVOs are hard to find these days, more drop, longer than 2015+ EVO
🖼️ Pictures and nothing else!_Legacy
🖼️ Pictures and nothing else!_Legacy
- SOLD
Condition: Brand new, never used, but have some scretches
HTD5M 20T 8mm bore, 3mm keyway, 15mm wide, Steel.
- SOLD
Condition: Brand new, never used.
Receiver included.
- SOLD
Condition: Brand new, never used, still in wrapper.
- SOLD
Condition: Used, scretches everywhere, bunch of holes drilled, inside has lots of big scretch marks.
Fits prefect on a Trampa Holy Pro deck. Most sturdy Case I have used, also waterproof if you use cable gland, I ran my board through a river bed, everything is dry inside. Only one piece of foam for bottom.
- SOLD
Condition: Brand new, no scratches, no holes, Full foam.
Top speed: 17mph.
Torque: Let’s just say it can do wheelies pretty much anytime you want.
Range: 15-20ish offroad use.
- Trampa Holy Pro 15ply.
- MBS Matrix II trucks with metal baseplates. (Yellow block front, red in rear)
- E toxx gear drive 1:6.25 reduction. (holes drilled for encoder, but didn’t end up using them)
- Maytech 6374 130kv.
- Maytech 6.6 controllers.
- 12s5p NESE 40T with charge only BMS. (3 cycles)
- MBS F5 Bindings.
- E toxx Hubs with MBS T2 9inch tires and tubes. (bolt directly on gear drive no adaptors needed for maxi and mini drive)
- Amazon light bar powered by 4s lipo has its separate switch.
Water crossing: https://www.instagram.com/p/B3THrHzFqDD/?igshid=1fzmjbd0tivbe
SOLD shipped 2x maytech 6374 closed can motor. 230kv, 8mm shaft, 5.5mm bullet connectors, cans are battle hardened. Have not had any issues with them for last maybe 500 miles. Still runs great, no problem at all, hit 40mph+ constantly without issues, solid motors imo. that scratch is only surface. Probably looks brand new if you unwrap it.
SOLD. NKP 3 link trucks, new CNC version. Brand new, never used, never mounted. I accidentally bought too many sets… Nothing else needed to be said about them tbh. You know the deal.
SOLD shipped. Focbox 1.3, vesc-x, whatever you wanna call them. tested both powered on, and was working when pulled off. Split ppm recommended. XT60 and 5.5 bullets
SOLD shipped for this lot. SurfRodz RKP 2x 200mm hangers one red one black. 50D baseplate, 35D baseplate (can only be mounted for new school truck hole pattern), 45D baseplate. 80mm axles x4, 90mm axles x2, 100mm axles x3. Brand new extra black hanger. 16T motor pulley, 36T abec press fit wheel pulley. 275mm belts w/20mm width. Psychotiller press fit motor mounts. basically complete drive train, just need motors and wheels.
SOLD Brand new never used TB218mm trucks with 3DS nano gear drive 1:2.6 kegel 8mm motor shaft.
Let me know if you have any questions or need more close up pictures for specific part. Thank you!