Caguama wheels wiggling on TB trucks.

How-Tos & Esk8 mechanics Esk8 Mechanics
#1

Hey guys. I’m in the process of building my drivetrain when I realized my wheels were wiggling if not extremely tight on the axel.

In the first video, you can see the wheel freely rolling but it wiggles.

In the second video, you can see the wheel rolling a little slower because of the resistance but it doesn’t wiggle as much.

I can move the mount over but It’ll reach a point where I cannot fit my other 6354. What should I do? (There is 1 washer between the wheel and the truck)

IMG_0233

IMG_0234

#2

The videos aren’t showing. Either drag an .mp4 file into the edit box, or put a youtube link :wink:

1 Like
#3

Ok probably because of my wifi. Give me a sec. I might have found a solution…

#4

You sure you don’t have 10mm bearings or something? If they don’t say 609 on the side they are useless (unless it’s rebranded)

1 Like
#5

It’s probably because using apple stuff.

3 Likes
#6

@maxmayer what bearings do you have in the wheels? Also your pulley is way to close to your mount. I can hear it touching it

1 Like
#7

Are you using bearing spacers ?

1 Like
#8

They are bobrs

#9

I don’t think so…

#10

Update. It looks like this now:

image
image3024×4032 2.69 MB

#11

Fixed the spacing… I think. Bearings are BOBRS

#12

Is the wheel still wobbling ? @maxmayer

1 Like
#13

I’ll send a vid, give me a sec.

1 Like
#14

Also what bearings are you using ?? Any pics ?

1 Like
#15

Here’s the pic. Video coming soon

image
image3024×4032 3.83 MB

#16

You don’t have a spacer in between those ?

1 Like
#17

I’d recommend just buying some zealous bearings

3 Likes
#18

You can try changing the bearings.

I believe that wobble is the bearings.

2 Likes
#19

Zealous steel bearings 100%

2 Likes
#20

I’ll check them out. You think they’ll do the trick?

I don’t have any other bearings right now so I’ll need to wait. Ik sending a video soon. Also while I’m at it, do I need the crossbar?

1 Like