Hey all.
I was very into diy esk8 a while back, but i’ve since lost interest (mostly due to time 
). I’m happy with my production board so I’m selling off all of my parts. Please see the photos a list of items below. There’s also a bunch of freebies down the bottom 
Please note this is cross posted from esk8 builders (hence all of the sold things)
I know i’m a new member, so feel free to ask and i’ll be happy to send you a photo of the item with your username + date. I’ll accept paypal payments + Australian bank transfer (or Payid). I’m also happy to meet up in Sydney.
I will post in Australia with Sendle (cheaper) or Auspost. Will also post worldwide if you’d like (calculate pricing here, select send from Sydney NSW 2000, standard or higher (economy has no tracking)).
Pricing is in AUD
Feel free to make offers on anything, I may have priced things high since I haven’t been in the game for a while.
I’ve also got a bunch more stuff to list as I go through it + a complete diy board to sell.
Items for Sale
1x 36t/15t pulley kit. Includes Wheel pulley x1, motor pulley x2 and all hardware $20 AUD
1x Enertion NanoX remote - brand new - $58.5 AUD
Sold
3m pure nickel 10mm tape. I’ve tested this and it’s pure (supower was the vendor I think) FREE
4m nickel tape - not sure if it’s 100% pure, vendor unknown, FREE
1x battery heatshrink - clear - SOLD
1x Brand new Maytech Vesc - SOLD
2x 5000mah 4s 25c Turnigy Lipos - $15 AUD (great for a first board). They are a pretty well used but work fine.
sold
30m katon tape (min 20m left) AUD $5
sold
1 set of 90mm abec clones - $14 AUD
Sold
2x unusedSk3 6364 190v motors - flexible silicone wire + carbon wrap - $75 AUD ea
Sold @glyphiks
1x psychotiller Split low pro enclosure. Not, I cut about 2cm of the underlapping side of the case (was too long for me proposed build) $10 AUD
Sold @projecteldor
Complete Hardware Kit. Includes:
MBS Wheels Retail $110
36/15t pulley/belt kit for each wheel Retail $50 each
Risers Retail $10
Loaded Bolts Retail $10
63mm Torque Boards Motor Mounts Retail $170
218mm Torque Boards Trucks Retail $90
Would prefer to sell together, but will split if there’s no interest as a package.
$350 AUD OBO
Sold @projecteldor
2x Brand new Enertion Focboxes - $175 AUD each - Sold @Rustedbucket
1x brand new (in box) Unikboards 10s3p enclosure w/ foam seal - $35 AUD Sold @ProjectEldor
2x sets of TorqueBoards 218mm Trucks - $80 AUD per set Sold @ProjectEldor
30x Samsung 25R cells (brand new, plus 4 more that were used for testing) - $70 AUD Sold @ProjectEldor
1x brand new GT2B - $30 AUD - Sold @Rustedbucket
Freebies
First preference goes to those purchasing other items. If there is stuff left over I’ll open it up to everyone.
1x caliber clone truck:
gopro truck mount:
hobbywing esc programming card:
Carbon fibre wrap (2m or so)
gone
2x 3000mah 3s lipos - well used (but hey they are free)
Abec pulley
Capacitors
