MakerX simple Anti-spark switch

#97

you will smell it :stuck_out_tongue_closed_eyes:

#99

A pic of the blown unity switch or my kick to push settings

1 Like
#100

My design only needs 3mph :).

5x prototypes tsun.

3 Likes
#101

I’ve been running it for almost 100 miles now on my Frankenwheel, it is on 8s, but hasn’t had any issues at all

2 Likes
#102

Only a few win the lottery ya know. :wink:

1 Like
#103

What is the latching power button in the picture…I have no idea what the connector is

#104

Fire one at me. I’m about to build a new non unity board and I’m sick to death of failing antisparks. I know you’re going to do it right.

Full review and a blowjob

6 Likes
#105

line_1563930703679
line_1563930703679.jpg720×1280 449 KB

PM PO box :).

5 Likes
#106

I want that…

#107

There will be five, who will be lucky winners to have another exploding bulletproof antispark?

6 Likes
#108

Both if you can, please :pray:

2 Likes
#109

Oooh looks just what I need!
I have some boards that really could do without a loopkey…

#110

Any updates on this anti spark switch??

1 Like
#111
2 Likes
#112

image
image3024×4032 3.85 MB

Are there any threads or videos on putting this thing together :blush:
@YUTW123 or anybody that’s done it thanks

#113

whaaaa??? The xt60s should’d come pre-soldered to the pcb.

1 Like
#114

Not with my luck I don’t mind doing it but would like to see it done first so I don’t F it up :joy:

#115

What you choose to buy is separate. You can choose to solder the socket to the PCB. Or directly solder the wire on the PCB. As for the radiator, it can be used without adding it. The current is enough. The voltage is recommended not to exceed 10s.

1 Like
#116

Soo any good and decent switches out there?

#117

FS smart switch?

1 Like